Print PDF
Favorite
Email
Step 3Setup the Laser and Cut a Hole.
Setup the laser behind the pumpkin and cut a hole in the back to allow the laser to come through. You could place the laser inside but you may not produce the same effect and you might get your laser full of pumpkin goo. You may have to make slight adjustments to the laser to get all the beams to project out the mouth and the eyes.
We also used the lasers with Diffraction Gratings for back lights and background which helped to increase the effect of the Laser Pumpkin.
We also used the lasers with Diffraction Gratings for back lights and background which helped to increase the effect of the Laser Pumpkin.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
