With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This instructable shows how I made a laser cut box with a curved lid to house a wireless sensor node. I made it at Techshop SF. The node measures te...
I had quite a good picture in my head of the shape I wanted the box to be. I used Inkscape to create the design, working in "outline" mode so that I ...
I used Inkscape to draw the design but TechShop uses CorelDraw to operate the laser cutter. I found the only way I could get CorelDraw to read an Ink...
Follow the instructions in the images to assemble the sides of the box.
Feed the antenna through the hole in the lid. Carefully bend the lid down symmetrically to avoid snapping the small pegs on the sides. Ho...
Here's the completed article.
Here's what happened to the birch ply lid with my original design when I tried to make the bend. back to the drawing board! (See step 7 for my impro...
Since only 2 of 3 of my first batch of boxes survived the bending process, I made a few different modifications to the design and cut them over the we...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »