Step 4: Programming the laser cutter

First you need to create a postscript file. I suggest you do your drawing in Inkscape. It's an open sourced program for vector drawing. But not just that, it is the only app I have that lets me save drawings as //CLEAN// postscript files that we can work with later. So even if you do your original drawing in Illustrator, save it as a .SVG and reopen it in Inkscape, and from that application save your drawing as a .ps file. Postscript.

Don Lancaster wrote some postscript code that can take a post script file and then turn it into a simple text file that contains the numbers 0-7. The meaning:
0 - E
1 - NE
2 - N
3 - NW
4 - W
5 - SW
6 - S
7 - SE
U means move the pen up
D means move the pen down
and that's all we're going to be using

For those who like to hear the instructions here's a video:


Update, easy way to make a Flutterfly

Some people were having trouble figuring out how to create a flut file, so Bryn helped everyone out by creating this program that does it for you, make sure to send it a file that is "fair", that is without any showpage's, or quit commands in the .ps. The program automatically spits them out, but check the ps if you hit the error page.
flutterflier, this is where you turn your postscript into a flutterfly

--The old way to create a Flutterfy--
Once you saved your drawing as a postscript file. Open it up in a text editor like notepad. Also open up the file yourpostscripthere.ps in notepad. Cope the entire body of your postscript drawing and paste it in flutterafy.ps right after the line that says:

% ============= YOUR POSTSCRIPT SOURCE FILE STARTS HERE ===============
% ============= MUST NOT INCLUDE SHOWPAGE, QUIT, ETC... ===============

then you paste your stuff in here

% ============== YOUR POSTSCRIPT SOURCE FILE ENDS HERE ================

then change the paths in these two lines:
/destfilename (c://pope.txt) def
(./pope.txt) readflutfile % read selected flutfile
change these to the values you want to find your finished flut file at.
Resave yourpostscripthere.ps
and install http://pages.cs.wisc.edu/~ghost/doc/GPL/index.htm Ghostscript]: Once you have ghostscript installed you can either drag yourpostscripthere.ps to the icon, or open it up inside ghostscript, it'll create a flutfile for you in the place you told it to c://whateveryousaid (remember to use doube /'s like c://sommat// ..)

So now you'll have a flut file. here's a demo for ya:
(this is the stencil that i cut out, it says "hello lasers!")

next you need to open a C compiler. the old version of bloodshed DEV CPP works great! Get v 4.0, not the new one.

This is the flutafy.cpp file that you can edit to run your own flut file. Right now if you compile it it will create an executable that will accept any filename as a parameter. So you just drag your .txt or .flut file over to the .exe and it'll start chomping. chompchompchomp. I'm providing this code so if you want to make any improvements you can. Please share with me though.


If you don't know much about programming. Here is the executable:
Executable for a .exe that lets you drag any flut file to it and will run the stepper motors properly

And if you have XP you'll need this one:
Updated exe for XP
XP users will need this DLL to run this code:

(For instructions on how to install a DLL, Lifehacker has a nice one.)

Now you can drag any file that has 0-9 for step directions (a flut file. I have some in: http://modati.com/lasercutter/) and it will start communicating with the laser cutter you just made.

If your parallel port is plugged in and everything is working okay you should be cutting in no time!

Bilal Ghalib
<p>Now get a 100W laser from http://unitednuclear.com and cut diamonds :D</p>
<p>At least it can cut glass</p>
<p>Endurance L-Cheapo laser test</p><p>Cuts wood, plywood acrylic upto 2 inch.</p><p>Wait for new tests with compressed air and vacuum cleaner</p><p>[url]https://youtu.be/FQtI5c7s6nA[/url]</p><p>[url]https://youtu.be/4KOZXNG05TI[/url]</p><p>[url]https://youtu.be/Hwy9GsZvarI[/url]</p><p>[url]http://www.youtube.com/watch?v=lHwT63qztg8[/url]</p><p>More info about Endurance L-Cheapo [url]http://endurancerobots.com/products/laser-cutters-accessory/[/url]</p>
<p>I really love the posts with the images. You guys are doing great work.</p><p>http://www.printman.co.in/cutting-creasing-rule.html</p>
<p>http://3dprintingindustry.com/2015/07/27/l-cheapo-converts-3d-printers-into-laser-cutters-for-cheapo/</p><p>Article about Endurance diode laser cutter 2.1 Watt L-Cheapo BY MICHAEL MOLITCH-HOU how to convert 3D Printer into Laser Cutter / engraving machine</p>
<p>I would be willing to pay $250 for someone to build this for me. 50% upfront. 50% upon delivery.</p>
<p>Do you want L-Cheapo laser only for 195$?</p>
<p>you can try L-Cheapo Endurance laser cutter.</p><p>Open source hardware.</p><p>More video and picture available here</p><p>http://endurancerobots.com/products/laser-cutters-accessory/video-in-action/</p>
<p>Link to Ebay Store is broken. Come to a page that says the user could not be found</p>
<p>plz send me your email </p><p>my email is : laribi-raouf@hotmail.fr</p>
<p>Awesome! What is the scan gap? I need to know!</p>
<p>How exactly does this connect to a computer?</p>
This instructable inspired me a little.<br/><br/>Imagine you'd want to create laser-cut plastic stencils for surface mounted PCBs, you're not willing to buy them at $25 each and your room is lacking the floor space required for this otherwise elegant solution. <br/><br/>Would it be possible to create a laser cutting &quot;printer&quot; by converting a B/W inkjet printer by replacing the cartridge with a laser-diode - possibly a blue one?<br/><br/>That way you'd get the X and Y axes from the printer, plus the motors that are obviously precise enough for regular printing so you'd only need to mount the laser and most likely replace the circuits from the printer.<br/><br/>Am I on to something or am I on a wild goose chase?<br/><br/>ps. I'm talking about the thin transparent plastic sheets <a rel="nofollow" href="http://en.wikipedia.org/wiki/Transparency_%28projection%29">commonly used for projection</a> on a wall.<br/><br/>
lasers especially those using diodes have a hard time with clear materials as the light passes tight through them. you would either need a very high wattage laser (so as to heat the backing material) or you would need a near infrared or beyond uv light that will be stopped in seemingly clear materials. all in all the easiest and possibly cheapest method would be to use colored plastic
That's exactly what I wanted to do. Let's just hope the printer motors will have enough torque. I tough of hooking up the laser power supply to the ink 'trigger', which means, instead of sending ink onto paper, the laser will be triggered. Thus, the surface, burned/etched/cut. I would suggest a potentiometer at the laser supply to adjust laser power. You could then just print a B&W image, where the black parts would be where to be etched/burned/cut. Sounds good to me, I made rough plans based on my inkjet printer here.
I was thinking the exact same thing. Have you gotten anywhere on that ink trigger? I'm also trying to figure out how to activate the diode when it &quot;prints&quot;<br/><br/>A problem I see is that every time the diode and the driver circuit turns off, the capacitor should/needs to be shorted out to protect the diode. Is there a way we can hook it up to the potentiometer so that when it triggers, it switches from low output visible to full 100-200mw. Thinking about <a rel="nofollow" href="http://laserpointerforums.com/f42/diy-homemade-laser-diode-driver-26339.html">this</a> driver. Any thoughts?<br/>
2 problems:<br /> <br /> how do you keep small bits from getting stuck in mechanisms instead of coming out<br /> <br /> and<br /> <br /> how will you protect the other parts of the printer from the rest of the laser that shines through<br />
&quot;how do you keep small bits from getting stuck in mechanisms instead of coming out&quot;<br><br>how about adding something that will blow the small parts and push into desired direction and be sucked by sort of small vacuum?<br>just an idea ;-)
Use a fluorescent light diffuser (aluminum) and make a vacuum box, any cut away parts will be pulled down into the trap. This is how we handle it on a very high power CO2 laser. <br> <br>Lithonia Model # L2GT PLTS R5 <br> <br>http://www.homedepot.com/Lighting-Fans/h_d1/N-25ecodZ5yc1vZbvn5/R-100579509/h_d2/ProductDisplay?catalogId=10053&amp;langId=-1&amp;keyword=light+diffuser&amp;storeId=10051#.UJka1mf4J2g
well, 2nd problem first:<br /> If you use an &quot;ink&quot; trigger, you don't really need to worry as it will only turn the laser on when &quot;ink&quot; would be applied, or, in this case, laser cuts made.&nbsp; It shouldnt be on long enough to put a hole through plastic.<br /> <br /> For the first question, hope and prayer?<br />
Agrees with the first problem's solution lol. Just hope for me.<br /> <br /> Or, you try it first. If it doesn't go through the printer correctly, well it won't while lasering.<br />
You have to build an enclosure, and use a shop vac to create suction to pull the waste away from the cutter.&nbsp; instead of a solid plastic sheet to place the paper on perhaps some kind of metal screen should be used to allow small waste to fall through and withstand the heat of the laser.<br />
&nbsp;Why, you are right. Plus I could use some steel sheet painted black, with a &quot;hi-heat&quot; paint (like the ones for high temperature parts in cars, like brakes and some engine parts). The black is to actually absorb the heat, cauz if I used some metal finish, it would actually reflect the beam and it might damage something else.&nbsp;<br /> <br /> <br /> Screw what I just said. ceramic. non polished finish. Heat cannot kill it.<br />
Or you could glue/tape on a sheet the laser can't cut through. The actual material you use would depend on the kind of laser you use and how powerful it is, but the principle idea would be like using a piece of black paper with the edges glued onto a piece of white paper. The laser cuts the black paper, but not the white paper. The pieces from the black paper are trapped between the black and white pieces of paper, so nothing ends up in your printer. When it comes out just cut off the areas you glued and you have a nice clean stencil and a nice clean printer. Sometimes the low-tech solution is the best solution. :) Also, for a cutting laser you can just use the laser from a DVD-R/RW drive - these are very powerful Class 2 lasers that are quite capable of cutting thin materials, especially black colored material. They should also go right through any clear plastic, so you can just use a transparency as your backing material.
use spray adhesive to connect the 2 papers...though, it may spontaneously combust :P
You make an interesting point...have you gotten any feedback on that?<br><br>Wes
Why use a blue diode?<br /> <br /> those just 'look cool' and cost alot<br /> <br /> <br /> get a high-powered red diode, it's cheaper<br />
&nbsp;Blue cuts a wider range of colors
blue doesn't just &quot;look cool&quot; blue lasers are at around 400nm in wavelength meaning a lower mW laser could cut more effectively than it's red counterpart. As far as expense goes... 20$ for one powerful enough to light a cigar. plus they look cool.
In picking the color of the laser, coolness is a side issue. As to which cuts better, you have to ask yourself, what color does your target absorb? If you think of a color wheel, you'll be on the right track. An object which looks blue (when you shine white light on it) is absorbing the orange and red part of the spectrum. An object which looks green is absorbing the red part. Something that looks white isn't absorbing visible light much, mostly just scattering it, and if it looks black (or brown), it absorbs most of the visible spectrum. This works until you get into much more exotic stuff light multi-photon absorption, but you don't want the grad-school optics lecture here. You can cut stuff that's clear (like plastic film) nicely using an infrared laser , such as the ones in DVD burners at 785 nm (but be careful, just cause it's invisible or you can barely see it doesn't mean it can't hurt you.)<br>The same logic goes with laser safety glasses--you have to pick the ones which block the color laser you're using (but then, you can't see the laser either, be prepared for that!). Remember, it this thing can cut even paper, it can hurt your eyes. We use webcams to look at our laser hitting things in my lab, they're cheap and don't get hurt.
Thats a great idea.. I have seen a guy who is doing that and is cutting foam sheet. I cannot for the life of me find it right now.. but it can be done.<br />
I would make one of these if you can do that.
lol, read my first comment, then PM if you're interested, I'll try to find out my "plans" and communicate with you for further project rendering.
<p>Hey I know this is a little late to post questions here, but I've been looking all over for laser cutter plans and this ible is AWESOME! I was wondering though, do these lasers over heat and burn out after cutting for so long? I see you cut that stencil which is all I want to do but I heard even 300mw lasers will burn out within 5 minutes constant use...</p>
This project looks like fun! Does it require a parallel interface, or can USB scanners also be used?
Cool work! <br> <br>The ebay link is expired, so could you please post the specs for the laser components? <br> <br>Thanks!
PERFECT! thank you sir! <br> <br>p.s. Wouldn't mind watching a video of you explaining the 4 times electrical tape saved your life. I'm dead serious. Useful info for anyone that thinks it ok to substitute it with other stuff.
do you think it would be possible to make a handheld laser cutter? if so, please comment back
I've seen YouTube videos on converting handheld laser pointers into cutting lasers. Search it.
I have some projects that require acrylic pieces of various shapes that would be very difficult to cut with a coping saw or a jig saw, and was wondering if i could use this design to build a laser cutter that is capable of cutting i think 3/16th inch acrylic sheets. i have already found a nice free canon scanner, and am looking for another, but if this may not work, i will not continue.<br><br>Thank you for your time, Eron.
You need something more powerful. A CO2 laser would do.
AFAIK the reason you need the scanners for is to scavenge its stepper motors and the pulley it's fastened to. You need 2 scanners due to the fact that you need to be able to move the laser in 2 directions (x and y obviously), since scanners only need one.<br>Also, cutting acrylic with laser can be tricky because it's transparent and hence probably won't absorb the laser's energy as well as a black sheet of paper would (it's no surprise that he used black paper as a stencil, after all black absorbs the most light). This means that you might need a stronger laser or adjust the whole setup to account for the considerably longer cutting times. That's just 2 cents though.
cool ideas! my question is... what about using something like this to cut rocks?<br> yeah, i do cut rocks by hand but this idea would be so much easier and cooler.<br><br>any ideas on how powerful a laser must be to cut silica?<br><br>Thanx in advance!
Very powerful is how I'll say it is. Unless you can concentrate the laser by a lot you won't be cutting anything. By the way, a 1 watt laser is dangerous enough, a kW laser (I dunno what I'm saying) can be barely moved. You might as well motorize your drilling technique.
get an old tile saw and modify it. lasers are impractical
Have one...lol they make laser engravers for rock and jewelry applications, but they are spendy.
http://www.youtube.com/watch?v=uuLAkC6jrP0 you should replicate one like this , it of course requires more power but still can be made
This is awesome, I would love to try it! All of the modati.com links seem to be dead though, is there any way you could post an update with live links and/or files? Great job!
Probably a stupid question but do the two scanners have to be the same? Also would this laser be suitable? http://www.ebay.co.uk/itm/808nm-300mW-High-Power-Burning-Laser-Diode-DIY-Lab-New-/300694900620?pt=LH_DefaultDomain_3&amp;hash=item4602d00f8c#ht_2666wt_1270 <br>Great post thanks.

About This Instructable


1,562 favorites


Bio: Bilal Ghalib is interested in doing things that surprise him and inspire others. Let's create a future we want to live in together.
More by lamedust: Prosthetics Modification for Pain Relief of Pressure Points How to Teleport! Free 3D Scanning and Cheap 3D Printing! Shoulder tap to win friends and influence people - An Arab American improvised greeting
Add instructable to: