Instructables

Lasercut Boxing Kangaroo Toys

Featured

Step 4: Riveting the Arms and Front Wheels

Now for the arms use the 5/8" tube to rivet the two arm pieces together. 

5/8" tube to put the hand onto the arm.

To connect the arm "stick" to the front wheel place on of the 7/8"  tube through all the pieces with a washer between the arm "stick and the wheel pieces. 

For the second arm/wheel attachment do the same thing except make sure that it is mirrored.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!