Print PDF
Favorite
Email
Step 2Cutting
Cut a 4 or 5 foot section of the 3/4" PVC for the barrel.
Cut a 3in. section of the 3/4" PVC for joining the valve and the "T".
Cut two, 5in. sections of the 3/4" PVC for the handles.
Cut a 1 foot section of the 3/4" for joining the two "T's".
Cut a 4in. section of the 3/4" PVC for joining the chamber with the gun.
Drill a 3/8" hole into the center of the 2" cap and insert Schraeder valve then tighten.
Cut a 3in. section of the 3/4" PVC for joining the valve and the "T".
Cut two, 5in. sections of the 3/4" PVC for the handles.
Cut a 1 foot section of the 3/4" for joining the two "T's".
Cut a 4in. section of the 3/4" PVC for joining the chamber with the gun.
Drill a 3/8" hole into the center of the 2" cap and insert Schraeder valve then tighten.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
