Step 4: Pouring the mold bottom
This step is easy.
Pour the entire mix in the mold. Knock the mold against the table a few times to even it out and help release trapped air. When the plaster starts to get thick, place the egg in the centre. For candles place with the bottom down. Place the egg top down for all other castings. Only push as far as the mark we made on the egg. This will leave a small ridge around the egg, and that's what we want.
Take a half-hour break then move to the next step.
Pour the entire mix in the mold. Knock the mold against the table a few times to even it out and help release trapped air. When the plaster starts to get thick, place the egg in the centre. For candles place with the bottom down. Place the egg top down for all other castings. Only push as far as the mark we made on the egg. This will leave a small ridge around the egg, and that's what we want.
Take a half-hour break then move to the next step.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
