Print PDF
Favorite
Email
Step 13Hook Everything Up
I already had a Rane AC23 stereo three-way active crossover and a bunch of preamps and amps.
What's going on in the photo is:
The iPod (full of 256K VBR MP3's) runs to the TCC TC-754.
The TC-754 runs to the Rane.
I have the Rane set up to split the audio signal into three chunks: 0-70Hz, 70-800Hz, 800Hz and up.
The 0-70Hz chunk goes to the subwoofer.
The 70-800Hz chunk goes to the Dayton DTA-100 30-watts-per-channel amplifier. The DTA-100 goes to the 2225 speakers.
The 800Hz-and-up chunk goes to the Sonic Impact T-Amp 6-watts-per-channel amplifier. The T-Amp goes to both the Altecs (via an L-pad that pads each Altec down so it's the same volume as its supertweeter) and the supertweeters (each via a capacitor, which keeps sub-8K frequencies from hitting it).
Cable spaghetti!
What's going on in the photo is:
The iPod (full of 256K VBR MP3's) runs to the TCC TC-754.
The TC-754 runs to the Rane.
I have the Rane set up to split the audio signal into three chunks: 0-70Hz, 70-800Hz, 800Hz and up.
The 0-70Hz chunk goes to the subwoofer.
The 70-800Hz chunk goes to the Dayton DTA-100 30-watts-per-channel amplifier. The DTA-100 goes to the 2225 speakers.
The 800Hz-and-up chunk goes to the Sonic Impact T-Amp 6-watts-per-channel amplifier. The T-Amp goes to both the Altecs (via an L-pad that pads each Altec down so it's the same volume as its supertweeter) and the supertweeters (each via a capacitor, which keeps sub-8K frequencies from hitting it).
Cable spaghetti!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
