Introduction: Learning Binary

Hey guys I've been learning Binary for a while and I've got the hang of it now
So I'm going to teach you binary
It's really awesome believe me .
I'm going to teach you in 2 parts
Part 1 is about alphabet and part 2 is about numbers

Step 1: Part 1: Learning to Write the Alphabet in Binary

While writing the alphabet keep one thing in mind, they are always 1 byte i.e. 8 digits
When writing in the upper case we always put the code 0100 to denote that it's a letter and while in lower case we a rite 0110 at the beginning
We start the first letter by writing it as 1
So as 1 letter is 1 byte the letter 'A' would be 01000001
And we kep shifting the 1 to the left
As it gets shifted to the tens place the ones place becomes 0 again
So B becomes 01000010
But as the ones place has again become 0 the next letter would have 1 at the ones place
So C would be 01000011 and so on

While in lower case we put the code 0110 at the beginning
The rest is the same
a would be 01100001 and so on

Now you can write whole words but just remember to leave a little space between letters to avoid confusion
While giving space between the two WORDS give the code 00100000
Now you are ready to write sentences as well

Step 2: Part 2: Learning to Write Numbers in Binary

Numbers in binary aren't in byte form like the alphabet
So 1 is simply written as 1
But the 1 keeps shifting just like in the alphabet
So 2 is written as 10 while 3 is 11 and 4 is 100 and so on

Well thank you very much for viewing this and I hope it was helpful
Please do leave any doubts ar suggestions or questions or just regular comments in the comment box below
Than kYou


DIY Hacks and How Tos made it! (author)2015-10-18

Nice tutorial

RishikeshC made it! (author)RishikeshC2015-10-18

Thank you sir

About This Instructable




More by RishikeshC:CONTROL TV FROM LAPTOP(ARDUINO-PROCESSING SERIAL COMMUNICATION)Learning BinaryObstacle avoider using ir sensor
Add instructable to: