Picture of Leather Bracelets from Recycled Belts
There are plenty of old leather belts that have been discarded because of changing tastes, or a part broke, or maybe the original owner just got too fat. This technique is a way to make bracelets from these belts. Cut them carefully and you should be able to get three from each belt.

I'm using a laser cutter here, but the original technique was taught to me by my friend Becca who used leather tools to create cool effects as well. The method of decoration is your own, but making the bracelet itself is very easy as you'll see.
Remove these adsRemove these ads by Signing Up

Step 1: Decorate the belt

Picture of Decorate the belt
I used a laser cutter to etch this Japanese design into the surface of the belt. You can also use a leather stamping technique.

Step 2: Measure and cut

Picture of Measure and cut
Wrap the belt around your wrist and let it overlap by 1.5 inches. Cut with your favorite cutting tool.

Step 3: Mark locations for holes

Picture of Mark locations for holes
Wrap the leather around your wrist so that it is fairly snug, but still comfortable to move with. Now loosen the belt by an 1/8 of an inch or so to give yourself some room for the snaps.

Step 4: Drill or punch holes in ends

Picture of Drill or punch holes in ends
With the overlap of the bracelet where you want it, drill or punch out holes that are in the middle of the overlap.

Step 5: Attach the snaps

Picture of Attach the snaps
With a hammer, bang in some heavy duty snaps so that the bracelet can snap around your wrist.

Step 6: Wear it!

Picture of Wear it!
Sweet, you're done! Now snap the bracelet around your wrist or give it to someone else.