Instructables
Picture of Led Headphones
I Will Be Doing An Updated Version Of These Headphones In The Future Since I Didn't Have All The Room I Needed.
 
Remove these adsRemove these ads by Signing Up

Step 1:

Since I haven't seen a single person do this I will give a tutorial on how to make your own pair of led headphones

Step 2: What You'll Need

Picture of What You'll Need
13, 12:02 AM.jpg
13, 12:02 AM.jpg
13, 12:02 AM.jpg
13, 12:02 AM.jpg
Tip31 transistor Led(s) Batteries a soldering iron And obviously a pair of headphones

Step 3: Optional

Picture of Optional
Fabric Stuffed animal stuffing A dremel A switch And some amazing tunes

Step 4: Follow The Diagram

Picture of Follow The Diagram

Step 5: Grab Your Headphones

Picture of Grab Your Headphones
Take them apart (most of the screws are under the earpad). Solder everything according to the diagram. MAKE SURE IT'S IN THE HEADPHONES!!!!

Step 6: Close Your Headphones, Test To Make Sure They Work

Step 7: The Image Shows The Led Glowing A Bit But It Is Brighter In Person

Picture of The Image Shows The Led Glowing A Bit But It Is Brighter In Person
13, 12:02 AM.jpg
13, 12:02 AM.jpg
13, 12:02 AM.jpg
Have to play at very loud volume to get them to flash. I am not responsible for any hearing damage or headphones breaking!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!