Introduction: Led Matrix Arduino
In this tutorial i will show you how to interface 8x8 Led Matrix with Arduino UNO
Step 1: Watch the Video!
The video gives you a good overview on how to interface 8x8 Led Matrix Display with Arduino. You will able to display whatever on Led Matrix.In the above video i had show you how to display "MINDSTORM" . In the next steps though I will present you some additional information to make this project even simpler.
Step 2: Components Needed
The Components that you will required to create this project are as follows:
1: 64 Leds
3: 16 Male to Female Jumper Wire
4: Arduino UNO
Step 3: Create the Circuit
In the circuit you can see the schematic of the 8x8 Led Matrix. I had upgraded the circuit as you can see in the picture, the PCB is of more then 8x8 led matrix which is of no use for this project. I had connected the Arduino Uno to the led matrix as per to the circuit diagram with the help of male to female jumper wires.
Step 4: Upload the Code
Now your circuit is completed, it is time to upload the code. You can download it here.
Step 5: Success!
You did it! You had just learn how to interface the 8x8 led Matrix Display with Arduino Uno and Display whatever.
Feel free to check out my YouTube channel for more awesome projects:
You can also follow me on Facebook for news about upcoming projects and behind the scenes information: https://www.facebook.com/Mindstorm-16972498171696...