Print PDF
Favorite
Email
| « Previous Step | Download PDFView All Steps | Next Step » |
5
comments
|
Add Comment
|
1
Jun 17, 2010. 4:52 PMking kolton9
says:
on the step with the gears the small one doesent move is it intendended or not
Reply
Feb 14, 2009. 11:18 PMwangtrevor
says:
Are the 2 holed blocks in step 2 picture 11 necessary? I only have 2. Next time you shouldn't use "exotic" blocks like those i happened to have 2 from this years FLL (those pieces are very hard to find.)
Reply
16
Feb 15, 2009. 5:39 AMBitterberry9 (author)
says:
yes they are, because they allow the trigger to rotate at a certain area where it can mesh with the firing gear and, when pulled, let go of the firing gear. In the future, I'll try to design a mechanism without the 2 holed bricks (like the C3 I just made). In this case, you could probably try the one holed bricks, but I cant guarantee that they would work the way these do.
Reply
Feb 15, 2009. 9:05 AMwangtrevor
says:
oh lolz i just didnt put one ill tell ya what happens and which one should i put 1 holed bricks the one in picture one or in picture 11
Reply
16
Feb 15, 2009. 10:26 AMBitterberry9 (author)
says:
oh, I see what you mean. Picture 1+2 need the 2 holed bricks, but picture 11 doesnt really, I just used them to make the trigger more comfortable (so there want a big hole in it). You could use other pieces to fill in the gap. So, put the one holed bricks in picture 11
Reply
 |
Add Comment
|
