Introduction: Lego Project Instructions

Picture of Lego Project Instructions

By: Hannah, Laura and Alli

Step 1:

Affix two 2 x 4 pieces along one side of the grey platform. Repeat on opposite side.

Step 2:

Picture of

Conjoin a 2 x 4 piece to the platform in between the pieces attached before (in step 1). This piece will be going in the opposite direction of how it was attached in step 1. Repeat on opposite side. When finished with this and previous step, the blocks align the platform.

Step 3:

Picture of

Repeat step 1 on sides adjacent to what step one was completed before. Repeat step 2. When all pieces are fastened, the pieces are in a square, 2 blocks high on top of grey platform.

Step 4:

Picture of

Repeat step 1 and 2. (not step 3) Step 4 completed, is 3 blocks high on-top of grey platform. Is a solid square with a square hole in the middle.

Step 5:

Picture of

Attaching onto the innermost pegs/circles, secure 4- 2 x 4 blocks to make a square around the innermost square to attach to.

Step 6:

Picture of

Connect 2- 2 x 4 blocks in the innermost sqaure available to attach to. When done, there should be 3 levels of "stairs" or 3 sizes of squares (largest on bottom (3 blocks high), middle in the middle, smallest on top) attached to each other.

Step 7:

Picture of

Put aside. Merge 5- 2 x 2 blocks on top of each other, making a 5 block high tower. Connect a cave woman of liberty on top of tower on one side of top block. Fasten a grey staff with green sphere on top of staff in the woman's left arm. Place the 3 flowers piece in front of woman, on the right side. Connect tower to base (that was set aside). The tower should be centered on top level of base.


tomatoskins (author)2015-04-28

Great Lego project!

About This Instructable




More by Laura Original:Lego Project Instructions
Add instructable to: