Instructables
Picture of Lego Safe 2.0
13, 1:11 PM.jpg
13, 1:11 PM.jpg
This safe i made from the "IPROBERRY" version. The cage on the top is to hold the "keys". To build the original safe go to http://www.instructables.com/id/Lego-Safe-1 . There are 2 locking mechanisms in this version too. There are also different types of holes that fit the keys but do nothing to confuse others. The right side is the 2nd mechanism and the back is the "safe" part
 
Remove these adsRemove these ads by Signing Up

Step 1: The Keys

Picture of The Keys
13, 1:11 PM.jpg
The keys enter holes like the original. They can be removed and put into the cage. They are the same.

Step 2: Body

Picture of Body
13, 1:11 PM.jpg
13, 1:11 PM.jpg
The actual safe part is bigger but the same height. The door is bigger due to the size of the safe.

Step 3: The Mechanisms

Picture of The Mechanisms
13, 1:11 PM.jpg
The mechanisms are the same except for the tan piece on both.

Step 4: Size

Picture of Size
The size is showed in comparison with the other one. My fingers show the size of the other one.
DaveKay (author) 1 year ago
I like all of yours!
DaveKay (author) 1 year ago
Thanks
HollyMann1 year ago
Great job! Looks awesome!