Hiya! This is part one of my 4 part space police set! The space police moped, and its also good for other futuristic things! If you don't have the same colours/colors as this Instrucables, then you can use other colors/colours like as in brown chassis, and black sideswipes, or all brown, if you have a black chassis, then you could make one in the "Lego Power Miners" style, or substitute pieces for other pieces! Its all yours, you don't have to credit me, all you have to do, is make it your own. Have fun building!
Also, i am very sorry that the quality is poor, however, all i had to work with was some legos and a built-in laptop camera, otherwise, it would of been A lot better. so, please tell me if you need help, and i will attempt to remake it.
Remove these ads by
Signing UpStep 1: The pieces you will need!
Here is the pieces you will need, if you can not see the pictures, i can kinda show you how to make it through simple-ish text instructions.
What you will need:
One Moped chassis (Easly obtainable from buying the set Freeze Ray Frenzy)
Two 1x1x1 clear red slopes (For the back lights, mod them with LED`s to really light up)
One 2x1x1 white slope (Or for the cheapies, two 1x1x1 white slope pieces)
Three 1x1x1 flat clamp pieces (A.K.A. Handle Bases)
One motorbike handle (Yep, motorbike handle)
Two Pole-to-stud pieces (Good for making torches or lights)
Two 1x3x1 Slope pieces (For the back sideswipes)
Three 1x1x1 clear orange studs (Or, if you want to customise it, other colors/colours)
One megaphone piece (Preferably in gray)
Two 1x1x1 clear green cone pieces (Or you could mod them with LED`s too)
Two 1x3x1 rounded slope pieces (Curved, actually...)
Two 1x1x1 pieces with four studs on the sides, holes in the middle (Holes are important!)
One flat 1x2x1 plate (Preferably with a license plate sticker on it)
And about 5 minutes to build it.
What you will need:
One Moped chassis (Easly obtainable from buying the set Freeze Ray Frenzy)
Two 1x1x1 clear red slopes (For the back lights, mod them with LED`s to really light up)
One 2x1x1 white slope (Or for the cheapies, two 1x1x1 white slope pieces)
Three 1x1x1 flat clamp pieces (A.K.A. Handle Bases)
One motorbike handle (Yep, motorbike handle)
Two Pole-to-stud pieces (Good for making torches or lights)
Two 1x3x1 Slope pieces (For the back sideswipes)
Three 1x1x1 clear orange studs (Or, if you want to customise it, other colors/colours)
One megaphone piece (Preferably in gray)
Two 1x1x1 clear green cone pieces (Or you could mod them with LED`s too)
Two 1x3x1 rounded slope pieces (Curved, actually...)
Two 1x1x1 pieces with four studs on the sides, holes in the middle (Holes are important!)
One flat 1x2x1 plate (Preferably with a license plate sticker on it)
And about 5 minutes to build it.
Visit Our Store »
Go Pro Today »
Throw more light on it for at least 1 picture. I know the laptop cam isn't great, but the Lego is good.
L