Introduction: Lego Table
This will show you how to make a table with two seats with Lego! The reason behind this project is to make a scene or a mini Lego set. I have played with making this for a while and this is the final result. Hope you enjoy!
Step 1: Pieces
- 6x4 platform x1
- 4x4 platform x1
- 2x2 platform x1
- 2x2 brick x1
- Mini Figure chair x2
- Mini Figure x2
VisitLego Pick A Brick for pieces.
Step 2: Table Leg
In this step we will use the 6x4 platform, 2x2 platform and 2x2 brick. Start with the 6x4 platform as the base and add the 2x2 brick in the centre. Then on top of the 2x2 brick, place the 2x2 platform.
Step 3: The Seats
In this step we will add the Mini Figure seats. Place a Mini Figure seat on each side of the 6x4 platform base, in the centre.
Step 4: Mini Figures
In this step we will add the Mini Figures. Place a Mini Figure in both seats, then lift there arms so they are by the sides of there heads. (This makes it easier to insert the table top!)
Step 5: Table Top
In this step we will add the 4x4 platform. While the Mini Figures arms are still up, insert a 4x4 platform right under them as shown. Then connect the 4x4 platform on top of the 2x2 platform like shown.
Step 6: Finish
In this step we will finish off the project. Now you can lower the Mini Figures arms and you are done!
If you have any questions please post them in the comments or send me a P.M.
Thanks for taking the time to read and learn everything in this instructable!
We have a be nice policy.
Please be positive and constructive.