Introduction: Lego and Rubber Band Pistol

Picture of Lego and Rubber Band Pistol

Pistol made with standard Lego parts and rubber bands. The magazine can hold 6 bullets.

You pull the firing pin back and it gets locked in. When you pull the trigger, the firing pin releases and pushes the top most bullet out of the barrel.

The exact range depends on tension of the rubber bands. The one I made has a range of about 10 feet.

Step 1: Parts Required

Picture of Parts Required

Step 2: Barrel

Picture of Barrel

Step 3: Trigger

Picture of Trigger

Step 4: Hook Above the Handle

Picture of Hook Above the Handle

Step 5: Magazine

Picture of Magazine

Step 6: Add a Rod on the Other Side of the Barrel

Picture of Add a Rod on the Other Side of the Barrel

Step 7: Add a Rod in the Hook

Picture of Add a Rod in the Hook

Step 8: Barrel

Picture of Barrel

Step 9: Lock Both Sides

Picture of Lock Both Sides

Step 10: Bolt

Picture of Bolt

Step 11: Rubber Band

Picture of Rubber Band

Step 12: Load Bullets

Picture of Load Bullets

Step 13: Finished (from Different Angles)

Picture of Finished (from Different Angles)

Comments

lightowlerdan (author)2014-02-08

A fully functional gun

lightowlerdan (author)2014-02-08

Absolutely anazing

About This Instructable

1,766views

9favorites

License:

More by varadmathur:Street Light circuit using LDRLego and Rubber band PistolLego Crossbow
Add instructable to: