Introduction: Lego Usb

This is a new more compact lego usb

1 lanyard clip (minus the lanyard)
1 2x3 thick lego brick
1 2x2 thick lego brick
1 2x4 flat lego brick
1 kingmax usb stick (the really compact one)

exacto knife
drill press

Step 1: Step One

drill 2 small holes in the 2x3 brick as shown in the picture

Step 2:

drill or cut out 2 holes in each of the thick bricks just enough to snugly fit the usb stick inside

Step 3:

loop the lanyard clip as shown in the picture and assemble the pieces together and you have a new lego usb stick


admin made it! (author)2009-01-19

Hey, this is a great instructable and is very informative. Just one thing is missing... pictures! It really helps a lot when trying to follow directions so you should consider taking some photographs. Once you do that and leave me a message when you have so that we can publish your work. Thanks! Thanks for the cool instructable and we hope to publish this soon!

Banaczech made it! (author)2010-02-05

After building this same idea I decided to insert some small rare earth magnets in to each of the pieces to hold the cap on rather than use the lower connector. Works perfectly and holds tight. Thanks for the base idea - as always; ideas expand outward.

ktalex made it! (author)2009-08-23

howd u take it off lol?

zatek made it! (author)2009-06-08

I like this but i have no idea where to get a flash drive that small! Where can you get one?

meanwun made it! (author)meanwun2009-08-14

zatek ebay sells them fairly cheap

Thepage made it! (author)2009-04-26

This is cool thanks!

bazookaromz made it! (author)2009-03-29

such a great instructable!

alphasmith made it! (author)2009-03-16

very informative and simple. Nice Job!

About This Instructable




More by ghostnote:Lego usb
Add instructable to: