Step 7: Connect the parts
It is time to connect all the parts.
Pic 1: connect body and stand
Pic 2: add 3 spacers on each side.
Pic 3: add wheel and put however many spacers needed to fill the rod (will be different on each side)
Pic 4-5: now we are going to connect the barrel to the body.
Pic 6: Build
Pic 7: tie 2 rubber band together
Pic 8: add "bow" and rubber bands
Pic 9: build
Pic 10: build
Pic 1: connect body and stand
Pic 2: add 3 spacers on each side.
Pic 3: add wheel and put however many spacers needed to fill the rod (will be different on each side)
Pic 4-5: now we are going to connect the barrel to the body.
Pic 6: Build
Pic 7: tie 2 rubber band together
Pic 8: add "bow" and rubber bands
Pic 9: build
Pic 10: build
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
