Introduction: A Lifehack - Bobbin Case Board

Picture of A Lifehack - Bobbin Case Board

We showed how to make DIY bobbin holder before, and today we introduce advanced idea.

Let's add some idea to your magnetic board in your house, and place bobbin holder. It's more stylish and cute with easy way!

Terms of use

This article is provided by Brother Industries, LTD (“Brother”) under terms and conditions of Creative Commons Attribution-ShareAlike (“CC-BY-SA”). Users may use, copy, alter, or distribute any of the contents included herein, provided that, a) all terms and conditions included in CC-BY-SA and all legal provisions of “Instructables” (including, but not limited to, Terms of Service and Privacy Statement included therein) shall apply and Users shall be legally bound by them, and b) Brother shall not be responsible for any damages incurred to Users by following or reffering any instructions or guidances posted in this article or otherwise using, copying or distributing any contents (in ASIS or in modified style or manner) of this article. Brother disclaims any and all warranties that the contents of this article is safe, useful, harmless, academic, or have any possibility of merchandice, and Users shall use, copy, alter, or distribute the contents by its sole risk and discretion.

Step 1: Tools & Materials

Picture of Tools & Materials
Please prepare these items.
  1. Magnetic board.
  2. Adhesive bond for plastic & metal material.
  3. Bobbin holder.

Step 2: Put Magnet Back Side of Bobbin Holder

Picture of Put Magnet Back Side of Bobbin Holder

Please put magnet on the backside of bobbin holder. Please note don't put upside down of magnet aspect.

Also please once check which aspect can be put on magnetic board. We call it as Aspect A.

And we call another aspect of the magnet which cannot put on magnetic board as Aspect B.

Please stick Aspect B and bobbin holder. So you can put bobbin holder on the magnetic board with using Aspect A.

Step 3: Finish!

Picture of Finish!

Let's finish after dried adhesive bond!

Comments

mccandlessquilts (author)2017-09-19

Great for people who have a few bobbins, but I have over 200 to store. Plus, it would take me years to get that msny bottle caps.

dfab (author)mccandlessquilts2017-09-20

Thank you for your comment.
Taking a bottle of water a day would give you 365 caps through a year ;)

violetsmuse (author)2017-08-24

Great idea for verticle storage, and magnets are so fun!

dfab (author)violetsmuse2017-08-27

Thank you very much. Happy to see your feedback ;)

About This Instructable

480views

4favorites

License:

Bio: Brother Digital Fabrication (d-faB) provides unique project ideas and useful tips that enable all Makers and Crafters to say 'I made it !'. We are Makers ... More »
More by dfab:Bright Milky Way Quilting With LED - Arrangement of Perfboard Embroidery With Conductive Thread.ユニバーサル基板刺繍の応用 - 光るキルトライフハック - ボビンホルダーボード
Add instructable to: