With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I really wanted a light box for all the drawing I do. Specifically for a massive drawing I was working on. So naturally I got completely side tracked ...
Step 1. Have an idea, Step 2. Click clack the keyboard and mouse till it looks like what you want. I did this in 3D obviously. These are renders of th...
Make sure you have a steady hand when you are laser cutting. Jokes. It is so great these days that laser cutting is available to even hobbyists at a ...
I used M6 countersunk socket screws to put this together. All the holes were part of the laser cutting process. So all I had to do was tap the base p...
For the three support tubes that connect the sides together I used 40mm diameter aluminium tube, 3mm wall. I used a hole saw to make 6 6mm thick discs...
You can see in the first pic the range of motion for the table angle adjustment. The top tube acts as the pivot and the arm on the table top acts as t...
Like I said 99% of this is held together with M6 bolts. Pretty self explanitory this step, put all the bolts together. I think there is about 30 odd i...
The only serious plastic fabrication I had to do was the curved parts on the light box. I made this simple jig out of a piece of scrap aluminium, ben...
To light the table I used LED strip lights on a red acrylic tray. These are a flexible strip with an adhesive tape on the back, you buy it on a roll. ...
So here it is, works as intended so I was happy Forgot to mention the square cutouts in the table top are for my pen holders.
Remove these ads by
Signing Up
Not NiceInappropriateSpam7,303 views
49 favorites
Posted:
Apr 20, 2012
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »