Picture of Powered Light Up Backpack
4 LED lights on a Jansport Backpack.

4 LED Lights
1 BackPack(recommend Jansport)
2 Screw Drivers
1 Hot glue Gun
2 On/Off Switches
1 Electric tape
About 2 feet of Wire.
1 Wire cutters
1 9.6V Battery
2 Screws
Remove these adsRemove these ads by Signing Up

Step 1: Parts

Tools dat i used to Put it together.

Step 5: Procedures-5

Get the cable/wire to run throughout the backpack and into the strap to the main switch.

And thats it.. if ur still a bit more confused just comment about it and ill reply bak..

just a lil heads up people.. im not done.. in a couple of days im incerting speakers and a pocket sized amplifier..