Picture of Light Up Bike Spokes
Remove these adsRemove these ads by Signing Up

Step 1: Supplies

Picture of Supplies
You will need a light up glove from a local prize counter or dollar store and good tape.

Step 2: Step 1

Picture of Step 1
You will want to cut or tear the glove open, but be careful not to cut the wires

Step 3: Attaching

Picture of Attaching
13, 5:31 PM.jpg
I used black hockey tape and attached the battery to the spoke

Step 4: Done

You are done
klauser99 (author) 2 years ago
I did you should vote for it when it comes time to vote
You should enter this project into the Bikes and Wheels Contest!