3 Simple Ways to
Share What You Make

With Instructables you can share what you make with the world — and tap into an ever-growing community of creative experts.

PhotosPhotos

Share one or more photos of a project, recipe, or whatever you've made, quickly and easily.

Step by StepStep-By-Step

Share your step-by-step photos with text instructions of what you made so others can do it too!

VideoVideo

Share your how-to video. You'll need your embed code from a video site such as YouTube.

Light bulb snow globes

Step 6Santa and Reindeer -Lightbulb on side continued

After the sealant/glue has cured: (yes, this is the same as step 4, but with different pictures.)

Add 1/2 to 1 teaspoon egg shells (snow).
Add 1/2 to 1 teaspoon glitter.
Add distilled or boiled then cooled water, about 3/4 full.
Add a couple of drops glycerine (I tried adding the glycerine first but it made the glitter clump together.)
Top up with the water, as full as you can.

Putting it together

Apply silicone sealant to the inside of the cap.
Place cap on light bulb and apply sealant to outer edge of bottle cap.
Leave upside down until sealant cures (see instructions on package, mine required 48 hrs.) I suggest waiting longer than the recommended time, to make sure it's fully cured before you turn it right side up.