BY MESSING UP THE WIRING ON THIS MOD YOU COULD SERIOUSLY DAMAGE YOUR XBOX!!! POSSIBLY EVEN DESTROY IT!!!
In this instructable i will show you how to place led's under the jewel of your xbox. It adds a litle flare to the otherwise bland system, making it go from an xbox to an XBOX.
With the arival of the XBOX 360 a lot of kids are begging their parrents to cough up the 400 bucks to buy them the new game only to play a few songs or homebrew games or a long list of things that can be done by a hacked Original XBOX.
I have already seen an instructable on here on how to hack the xbox so you can add Xbox Media center onto it. BY doing that softmod you will be able to do almost all the cool stuff the 360 does, cept for maybe play the newest games. but that is just a trade off you will have to take.
So you decide you want to hack your xbox but realise that the XBOX still doenst have the flare that the xbox 360 does. That is where my mod comes in.
After you do this mod you can paint the case white, download the MC360 skin for xbox media center that makes it look just like an xbox 360, and you have a present that not only is a dang sight cheaper than an XBOX 360 but it also is a one off that no one else has.
The kid will be happy he/she has something so cool, you are happy because you only have to buy an xbox, and some lights and paint, so you save about 250 bucks or more depending on where you get your xbox, and the wifey is happy cause you were able to buy her that diamond earing set she wanted that you couldnt originally afford because you had to shell out 400 bucks for a 360. Only one not happy is Bill Gates but he can live off the other gazillion dollars he has and waite for your 400 bucks till Halo 3 comes out.
I decided on this mod as the one to do because it was the hardest that handnt already been done here. The rest of the mods like painting and eveything else are relatively simple and straight forward. Mine is not painted yet but I was going to save that for another instructable later.
this mod has a lot of steps but I tried to document all the important stuff. It may look scary but its not that bad. You will need to void your Xbox warenty to do this but isnt that really what this is all about. well it is to me at least. Oh well on with the fun....
Step 1: Items needed
Soldering Iron = For Soldering mine is just a dual heat one from radio shack
flux and solder = I find the thinner stuff is better and easier to work with but its all about preference i guess
q-tip = for applying flux
Butter knife = For removing the jewel
Hair Dryer = For removing the jewel
hole saw = For Cutting the plastic under the jewel. size should be slightly smaller than outside edge of jewel. when you are finished there will have to be a lip to glue the jewel to . again it is all about preference and how much you want to be showing under jewel.
Exacto Knife = for marking the areas you need to cut
straight edge = for marking the areas you need to cut
car window tinting = To cover the jewel, any color you want but do not get a color that is too dark because it will ruin the effect of the light. this is actually optional but I like the effect it gives.
LED's = 5mm or 3mm The higher the mcd rating the better. I used eight 3mm but youcould just as easilly use six 5mm
Hot glue gun = For attaching the lights and wire
Paint Reducer = for removing the green paint on the jewel
tape = for making a handle and other things
credit card = For applying the tint
napkin = for applying the tint
soapy water = for applying the tint
Wire cutters or nail clippers = For cutting the wires when needed.
Molex Connector = Either a "Pass Through" with fan connection or A "Y" splitter or a regular "Pass Through" will work
Wire = I find solid works better than stranded and i find the smaller wire works better
continuity = tester to make sure you didn't screw up
resistor = So we don't blow our bulbs up. Value depends on the Value and amount of the bulbs
aluminum foil = for making a reflector
cd jewel case = for making a reflector
heat shrink = Used to cover the connections after finished to prevent shorts.
i know its a long list but most of the stuff you can salvage from other projects like I did and it wont cost you much at all. i think i actually spent about 5 bucks out of pocket on the whole project.