Introduction: Lightsaber

Picture of Lightsaber

Our group created a lightsaber made out of a flashlight, gel and a florescent light cover. 

Step 1: Supplies

Picture of Supplies

These are the supplies we used

Step 2:

Picture of

We took the flashlight and drilled off the plastic cover. 

Step 3:

Picture of

We hot glued the plastic tube onto the flashlight.

Step 4:

Picture of

After the light cover was attached we made the tube shorter by cutting it. 

Step 5:

Picture of

We used this red material (gel) and put it in the tube so the light projected a red color

Step 6:

Picture of

We then painted the flashlight part making to make the handle realistic.

Step 7:

Picture of

This is our final result 


anandini (author)2016-01-03

I made it! It is really cool! Thanks!


When did you make this?

PirateLabs (author)2014-01-18

Nice project. It might be cool to try adding a small mirror in the end of the tube to bounce the light back into the tube. Well done.

transforming vintage (author)2014-01-17

pretty cool. this would be a good thing for me and my kids to make together.

Kiteman (author)2014-01-17

We need a shot of it in the dark!

About This Instructable




More by ericr141234:Lightsaber
Add instructable to: