Introduction: Lightsaber Curcuits.

Picture of Lightsaber Curcuits.

So... you want to make the lightsaber Huh! Well you have came to the right place. It looks like this. So lets make it!

Step 1: What You Need!

Picture of What You Need!

You need 2 straws (any colour), An LED (same colour as straw) I had it from a finger light and a AA battery holder.

Step 2: Lets Start!

Picture of Lets Start!

Place the LED in the straw. Next get the battery pack and connect them to the LED. Make sure that if you solder use a battery pack connecter if the holder has output.

Step 3: Testing It!

Picture of Testing It!

When the pieces are secure test the LED's brightness. If it's dim then check the curcuit. Else Congrats you've made a Lightsaber! Part 2 Coming soon (Making The Handle)

Step 4: Editing (Optional)

Picture of Editing (Optional)

I used Paint to show how easy it is. I added the logo and inverted it before scaling and moving it.

Comments

seamster (author)2016-01-28

Cool idea! Can't wait to see how you do the handle :)

moo06 (author)seamster2016-01-29

thank you also i might not be able to add photos for the handle exept for the handle its self

About This Instructable

918views

9favorites

License:

Bio: I Think My Name is None of your business!
More by moo06:Arduino LCD Keypad Shield PONG!Lightsaber Curcuits.
Add instructable to: