Step 1: What you need:
2 medium deodorant cans: same size (To make cover for stove)
4 nails (For holding pots, must be long and thin)
Heat resistant glue
Sand paper (150 for taking off the paint... and 300 to give it a nice clean shine)
Dremel (For making holes and cutting)
1 small coin for covering the filling holes
Step 2: How to put it together
2. Cut the two small ones exactly the same size (this will be your stove) and fit them into each other... Make 8 small holes on the top side for the fire and 4 on top for the nails. Make some holes in the middle for filling. The one on the outside is the top one!!! don't forget that... it works better that way...
3. Cut one of the medium ones so that it is only a bit higher than your stove make holes on it (like in the pictures)
4. Cut the other medium can just so that it is enough to cover the nails and fit into the other can, you might have to make some cuts so that it fits...
Use a lot of sand paper for everything so it's a tight fit....