Lightweight Electric Motorcycle With Bamboo Frame

Step 10 Wiring

Once all the pieces are attached, begin wiring them together. Be extra careful to keep one battery lead taped over until the very end. There’s not much we can say here, just keep an eye on the circuit diagrams and you’ll probably have to flip the polarity of the motor. Wire a switch in between the final battery lead and controller, along with the kill switch coming from the controller. We learned the hard way that the controller’s kill switch only cuts throttle input, and doesn’t actually break the circuit.

 

We assume you have prior experience wiring things, if you don’t, find someone who does to help you out.  

Comments

[sevakkishan]

nice