Introduction: LinkIt One + Blynk Buzzer

In this instructable I will be showing how to make a buzzer to keep your (insert word here) away

Step 1: Code

If you dont know how to install LinkIt One code click here

this is the code I made for this project:

-------------------------------------------------------------------->

//Code Created By FunguyPro www.funguypro.tk

#defineARDUINO150

//#define BLYNK_PRINT Serial //Uncomment for Serial Data

#include<LWiFi.h>

#include<LWiFiClient.h>

#include<BlynkSimpleLinkItONE.h>

// You should get Auth Token in the Blynk App.

// Go to the Project Settings (nut icon).

charauth[]="YOURAUTHCODE";

#defineWIFI_SSID"YOURSSID"// Your network SSID (name)

#defineWIFI_PASS"YOURPASS"// Your network password (use for WPA, or use as key for WEP)

#defineWIFI_AUTHLWIFI_WPA// choose from LWIFI_OPEN, LWIFI_WPA, or LWIFI_WEP


voidsetup(){

Serial.begin(9600);

Blynk.begin(auth,WIFI_SSID,WIFI_PASS,WIFI_AUTH);

delay(500);}

voidloop(){

Blynk.run();

}

Step 2: Connect Buzzer

Connect the buzzer to pin 2 and GND

Step 3: Install Blynk and Run

Don't know how to install blynk? Click here

Step 4: Need Help?

click here

Comments

About This Instructable

268views

3favorites

License:

Bio: I like to create new things! I'm very interested in IOT and just Internet Stuff. I am not responsible for any injury or deaths ... More »
More by Funguypro:3D Print Your House!!!!!DIY Raspberry Pi Indoor Outdoor WebcamSee Through Buildings With a Drone
Add instructable to: