My little cousin loves cars and his birthday is coming closer so i had to find a birthday gift but the car toys in shops are so expensive. Thats why i made some pretty cool cars for him by myself and how i did it, you can see in this instructable!

Step 1: What Do We Need?


☞ plank


☞ figure saw

Step 2: Get Your Design(s)!

I drawed my cars by myself, but if you aren't a good car drawer you can google some car designs!

Step 3: Saw It!

Now you just have to saw out this awesome looking cars and you're done!

Step 4: Sand! (optional)

Now you can sand the corners if you want!

Step 5: DONE!

Here you got some pictures of the cars I've made. I hope you liked my project and If you made one too, don't forget to post a picture of it in the comments!

Thanks guys!
<p>These are cool - how big are they?</p><p>Do you not sand the corners at all?</p><p>Oh, and have you seen this site? I think you'd love it:</p><p> <a href="http://www.100x100tobeus.it/wp/" rel="nofollow"> http://www.100x100tobeus.it/wp/ </a> ?</p>
<p>Thank you for sharing Kiteman Stephen Fry treasure.</p>
<p>Thanks for sharing, a wooden child inside of me is happy.</p>
Thanks!<br>They are about 3cm long and 1,5cm thick.<br>I didn't think it was necessary to sand the corners.<br>Thank you very much for the link!

About This Instructable




More by MichielD99:Make Your Own High Quality CO2 Lasercutter! With Touch Control! Make a Z-axis for Your Laser Engraver! Arduino Laser Engraver Wood Design! 
Add instructable to: