Introduction: Loaded Dice

Picture of Loaded Dice

This instructable will give you detailed instructions
to make a pair of dice that will always roll chosen number!

Disclaimer: Despite any jokes made during this i'ble do not
use this for personal gain.(other than the gain of watching your brother grudginly
do the task you bet on. Clean socks here i come)

Step 1: Get Supplies.

Picture of Get Supplies.

You need:

Dice (or die)(preferably more than 1)
Drill and bits of dif sizes
Nail (A bit smaller than bit)
tiny bit of some sort of filler (optional
Black Paint (or whatever colour your dots are)

Step 2: DRiLl!!

Picture of DRiLl!!

Drill in the whole opposite you want it to land on.
Make sure its not too deep so a bit
past half way is good.

Step 3: The Nail

Picture of The Nail

Cut off the end of the nail.

Put it into the hole you drilled to get
a feel for size.

Cut to that length.

If the nail wasn't small enough file it down.

Step 4: Finishing Up

Picture of Finishing Up

Put the nail in so it goes in a little bit then with the
dice in a vice hammer in lightly.

Paint over the nail so it looks like a dot.

Step 5: Make Grown Men Cry

Picture of Make Grown Men Cry

Make grown men cry by stealing their money wife and car....

OH and then beat them at dice... Yeah thats right.



cheaters (author)2011-04-21

Can someone please make me some i don't know how...

tangiers (author)cheaters2012-07-17

Still interested in some loaded dice?
shoot me a message.


Rgreen89 (author)tangiers2017-03-03

Send me your number let's talk business I will pay top dollar

Rgreen89 (author)2017-03-03

I need loaded dice send me your number if u have some for sell

andrew13 (author)2008-08-30

lol. i just bought a pair of loaded dice! : )

cheaters (author)andrew132011-04-21

From Where

Juklop (author)2009-08-27

Why not just stick it in the microwave for a buttload of time?

number1baller (author)2009-06-17

is the nail meant to weight it?

jdege (author)2008-03-18

The traditional trick for loading dice was to drill three holes, intersecting at the middle, and to load them with a drop of mercury. Tapping the dice on the table before the roll would move the mercury to whichever side you wanted. Mercury is, of course, somewhat toxic. But if you're cheating at dice, you're probably not going to have a long and healthy life, anyway...

noahh (author)jdege2009-05-17

I have also heard of doing that but filling it with wax so that when you hold it in your hands long enough it melts from your body heat, and then you tap them.

a grain of alt. (author)jdege2008-03-18

Neat! Thanks for sharing that.

duck-lemon (author)2008-03-19

please don't say anything offensive

CelloMan (author)duck-lemon2008-03-19

what the heck was offensive about it i was just joking and i know it wasnt you

Noodle93 (author)2008-03-19

I learnt once how to roll double sixes using a method some professional gamblers used. I mainly used it in Risk so I could win :P.

YummyPancakes (author)2008-03-18

LOL And then beat them at dice... Good one!

duck-lemon (author)YummyPancakes2008-03-19


GorillazMiko (author)2008-03-18

Looks pretty simple. Nice job! :D

mowdish (author)2008-03-18

Instructables wasn't made to discourage cheating either. It was, however, made to discourage pointless insults about the way someone looks.

CelloMan (author)mowdish2008-03-18

no, it was made so people could share things they have made and think other people might like making. Also I was just kidding, cant you take a joke

CelloMan (author)2008-03-18

you obviously like music and telling the world about your it as a passion

gmjhowe (author)2008-03-18

wow, thats actually very simple to do! tho i suggest making three dice, one that lands on four, one that lands on 5 and one on six. makes it less suspicious. (obviously you need some slight of hand trickery) Deffo deserves a vote from me!

About This Instructable




More by duck-lemon:Circumference Of A CircleAwesome Wooden Guitar ProjectMy Workshop
Add instructable to: