Introduction: Lockheed F-117 "Stealth" Fighter
This plane flies very well and I highly recommend it.
Step 1: Materials
Stapler
Knife
Scissors
Glue
Ruler
Pencil
Graph paper 5mm by 5mm
Step 2: Design
Step 3: Cut Out Design
Solid lines are cut and dotted lines are fold.
Step 4: Glue Base to Wing
Step 5: Fold and Staple the Nose
Step 6: Add Rear Fin
Step 7: Add Ailerons If Needed
Step 8: Enjoy!
Again this plane flies very straight and far. Please like, comment, or follow for more!