Print PDF
Favorite
Email
Step 3Build Legs
Get out your drill and a 1/8" drill bit and a screwdriver bit with two of the same sized legs.
Line them up as shown in the photo making sure to make them as flush with eachother as possible. Drill a pilot hole in the end and drill in the screw. Then move about a quarter of the way up the board and line it up, making adjustments if needed. Drill and screw keeping the board lined up. Do this until the end of the leg and then do the same with the other boards.
Line them up as shown in the photo making sure to make them as flush with eachother as possible. Drill a pilot hole in the end and drill in the screw. Then move about a quarter of the way up the board and line it up, making adjustments if needed. Drill and screw keeping the board lined up. Do this until the end of the leg and then do the same with the other boards.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
