With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I made this bed for my daughter, as her room is quite small, and storage space is limited. Moving the sleeping area up high makes the floorspace of t...
The bed was built in my shed, in 4 main parts. This allowed me to actually fit it through the door into the bedroom and also, the bed is far too heav...
I have used 35x300mm solid ply to build the bookshelf. It is very heavy, but also solid and strong. If this ply is not available, you could just as ...
For this end I used 90x45 pine. I used fairly large size timber as I wanted to be sure that there was sufficient strength. Again, the timber is glue...
The base frame is made from 2 stringers of 90x35 pine, with 42x19 supports along the inside of each length. 90x19 pine planks were cut, glued and nai...
I made the pegboard backing so that my daughter would have somewhere to hang her bags, scarves, necklaces, etc. I simply took a sheet of peg board an...
After painting all of the main parts with some pink paint sample pots that I got from the hardware store, it was time to bring in the bed and assemble...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »