Print PDF
Favorite
Email
Step 4Cut and Fill Box
Using a shot glass, I marked eyeholes and cut them. Between, I also cut a trapezoid shape with concave sides to accomodate noses.
An initial test with the mirrors showed they needed to be much closer to the eyeholes than I expected, so I cut a strip of card with tabs on the sides, which filled nearly 1/2 the box when folded and glued in place.
I also decided I didn't like the hole in the top, so covered it from beneath with a conveniently fitting picture of a bug glued to a panel of cereal box card. That's shown here in a dry run, but was later glued in place.
An initial test with the mirrors showed they needed to be much closer to the eyeholes than I expected, so I cut a strip of card with tabs on the sides, which filled nearly 1/2 the box when folded and glued in place.
I also decided I didn't like the hole in the top, so covered it from beneath with a conveniently fitting picture of a bug glued to a panel of cereal box card. That's shown here in a dry run, but was later glued in place.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
