Print PDF
Favorite
Email
Step 2Mould Making part 1
The mould is made from a 25 mm thick MDF circular blank rotated at low RPM in a wood turning lathe or suitable other equip. DUST precautions apply.
Be careful you have a sturdy support for the carving tool and with larger dia blanks. If a novice using a a local cabinet making business or facilities at a trade college may be advisable. After final sanding a couple of coats of gloss acrylic will do.
Be careful you have a sturdy support for the carving tool and with larger dia blanks. If a novice using a a local cabinet making business or facilities at a trade college may be advisable. After final sanding a couple of coats of gloss acrylic will do.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
