Instructables

Low Cost Computer Desk

Featured

Step 6: Finishing

The last step before assembling the desk was to cover the whole thing in a protective polyurethane coat.(Note: I will take at least 2 coats). Of all the steps this was the most frustrating because you have to first apply the urethane all over the piece and then go over the whole thing slowly with the paint brush to get out all the bubbles.  

(I know that is not polyurethane but both have the same affect) 
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!