I made the Low Cost IC Test Clip for ICSP of PIC Microcontrollers.


Step 1:

Use copper tape and cloth peg.

Step 2:

Put the copper tape on the cloth peg and cut the tapes as 2.54mm pitch.

Step 3:

Solder cables.

<p>That's a very clever idea. I always try to squeeze an ICSP header on my designs, but in case you have to deal with a board that doesn't have an ICSP header and the chip is soldered on it, this could be prove quite handy.</p>
<p>Clever idea! I just wonder where you get those tiny clothe pegs. I know, almost everything is tiny in Japan xD</p>

About This Instructable




More by saharaupro:Identify Which Chip Capacitor is Crying by Straw. Mount a DIP as a SMD on PCB Detouchable Converter Board for ESP-07 and 12 with Pogo Pins 
Add instructable to: