Print PDF
Favorite
Email
Step 6Put the Pieces Together
How to Assemble the Sign:
Layout the letters you need to create your word. Tightly tape each letter together with a strip of duct tape on the back side of the sign. Lace down wire ties through the attachment holes provided in the design. Finally, loop lengths of > 70 lb. load cotton or nylon rope through the holes provided on the letter squares. You will need two ropes attached to the top of the sign to hang it and two on each side to tension it. We attached an extension cord to one of the tensioning ropes and wire-tied it in place for strain relief.
Layout the letters you need to create your word. Tightly tape each letter together with a strip of duct tape on the back side of the sign. Lace down wire ties through the attachment holes provided in the design. Finally, loop lengths of > 70 lb. load cotton or nylon rope through the holes provided on the letter squares. You will need two ropes attached to the top of the sign to hang it and two on each side to tension it. We attached an extension cord to one of the tensioning ropes and wire-tied it in place for strain relief.
| « Previous Step | View All Steps | Next Step » |
 |
Add Comment
|
