Instructables

Low Plant Stand

Featured

Step 2: Marking

First Find the center.  Since my squares are about 13" x 13" -  I measured 6.5" from two adjacent edges.  I used a trammel/compass from The Home Depot to mark the radius.  Since these squares are the same diameter as the desired circles, I place the point in the center and extend the arm to the middle of one edge to define the radius.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!