Instructables

Step 2: Assemble your tools

For this project, I used:

A "high-speed rotary tool" with the following bits:
- #409 cutoff wheel
- #561 Cutting Bit

Soldering Iron, Solder, and heat shrink tubing
Wire Cutters, strippers
Scissors and a Pencil
Ear plugs and Safety Glasses

I'll emphasize ear plugs here. It wouldn't do to deafen yourself in the process of building a snazzy speaker array, would it? I like to wear earplugs when I do any work with power tools. (Or when I work with stupid fools.)

And of course, working with many of these tools is inherently dangerous. Just because I did this project without injury doesn't mean you won't hurt yourself. Be careful; as the agreement says: By using Instructables, you may be exposed to Content that is offensive, indecent, objectionable or unsafe. Each user must evaluate, and bear all risks associated with, the use of any Content, including any reliance on the accuracy, completeness, or usefulness of such Content.
 
Remove these adsRemove these ads by Signing Up