loading
Picture of Lowrider chopper bike, made of old bikes
RIG0019.jpg
RIM.jpg
RIMG021.jpg
In this Instructable you can see how to make a cool chopper/lowrider bike the cheapest way with some old bikes. Watch the bike down below, I just made it with two old bikes and some iron pipes.
I got the idea from another Instructable, watch the link below:
http://www.instructables.com/id/my-bitchin-ride/

Link to the blog:
http://blog.wdka.nl/make/2008/04/22/jiri-van-dalen-chopper-bike/

Instructable and bike made by: Jiri van Dalen

For: The make class, Willem de Kooning Academy Rotterdam


Step 1: What you need

Parts:

- At least two old bikes, one bike is also possible but gives your design lesser freedom.
- Bikes need to have two good wheels, the best is to have two different sizes. Notice: you should use a front and a rear wheel.
- Front fork
- Good working pedals
- Two bicycle chains
- Four meters of iron pipes
- Spraypaint
- Sheet iron
- Saddle
- Handlebars
- Keep the spare parts of the bikes, you could use them to finish your bike.

Tools:

- Welding materials
- Ironsaw
- Handtools
- Grindtool
 
alot of work to get something you want
2 stroke 4 years ago
all it nneds is a friction drive wwedeater engine setup
The bike looks good, but I hope you didn't trash the LeRun you got that seat off of.
karlpinturr5 years ago
Couple of bits of pedantry: Take the bike apart BEFORE cleaning it, as you'll have to clean where they've been, anyway. Also, why no sign of primer/undercoat? It does serve a purpose - Red Oxide slows rust, grey and white help your colour 'pop'.(the paint manufacturers will recommend one or the other for each colour, but experimentation can work well). Personally, I tend to use the Red Oxide first, then the grey, and finish with the white - the number of coats depending on how bright or rich I want my finish. And a clear (and, indeed, a not so clear) lacquer will protect you paint job,, as well as giving it more shine and depth. Anyway, those are picky things (probably because I haven't watched the video) - as others have said, "It's a chopper, therefore it's good". If I had them, you'd get FOUR thumbs up (and still I'd wish for more)!
The welding on the video was helpful. I may attempt this.
charles616 years ago
congratulations ! Nice and well done "teenager's bike" indeed but does not look very comfortable for the biker + lack of power (?). and what about aerodynamic when riding ?
Who the frick cares about aerodynamics and power! It's a chopper!
lilpep...and so on, Please consider the facts : driver is not in good position to push the pedals for acquiring some speed whithout getting soon tired and with the hands at eyes height he catch all the wind as if he was an "entonnoir". But, indeed, you are right, it's a chopper, even a Great " Wind Chopper" even if I found it fine and well done. Thank you for your comment.
Derin6 years ago
you could use bikes with coaster brakes...just a thought
zuneman6 years ago
This one trick bike man!
Charger_067 years ago
nice bike i have some plans for a custom bike u might wont to make! if u want em privet message me!
oddblob7 years ago
nice ride.. when you refer to iron pipes, and sheet iron, i am presuming you mean steel?
Derin oddblob7 years ago
I think so,mine has Lite Steel written on the handlebars
hobbyman7 years ago
nice bike, might look better with a smaller front wheel i guess. ;)
haz6sic67 years ago
it shouldn't be that hard to configure a set of brakes for the bike. just grab an old U-Brake caliper, measure and drill the holes and you should be fine. finding a cable may be a little difficult, so shop around and I would advise against having front brakes. because of the extra length on the bike, you would probably lose balance and the tail might kick out while braking. the brakes, and 8" rise bars, and it should be close to perfect
Doveman7 years ago
Nice bike dude!
Plastic Fir7 years ago
is the bike hard to steer? are chopper bikes sensitive?
That bike is Badass. I might try to get my friend to make it to compete with my chopper. Good Job
themakeclass (author)  The Rocketizer7 years ago
Thanks It was my first experience with a chopper bike so I was very pleased with it I'm glad you liked it.
bumpus7 years ago
that bike looks very well done, not like some of the hack-jobs done to bikes on instructables
themakeclass (author)  bumpus7 years ago
Thanks for your comment.
Well I don't see you trying to make any cool bikes. I reckon most of the bike instructables are quite good. Don't criticise if you have no experience.
its just my opinion, and i favor this instructable over most of the others.