Instructables
Well, I got quite a bit of requests to post this, so I will.
Before I go into pros and cons I need to tell you that this is a single shot, and it DOESNT have a mag in the handle. 
PROS AND CONS!

Pros:
Looks awesome
comfy
powerful
Trigger that blocks far back
quite low part use
has a bullet lock
Accurate

Cons: 
Trigger is kinda different (rather than listening to a trigger click once, this one has to click twice)
Uses a lot of Y clips (not a problem for me)
Handle plates fall off sometimes (can be fixed with an elastic)

Note: this gun uses three broken white rods (two optional) and a green rod cut in half. And two broken Y clips are optional. A broken orange connector is also required. (Both tabs taken off)

GET BUILDING!
 
Remove these adsRemove these ads by Signing Up

Step 1: Handle

Picture of Handle
M1911.45 1 006.jpg
M1911.45 1 007.jpg
M1911.45 1 008.jpg
M1911.45 2 002.jpg
M1911.45 2 003.jpg
This is the handle. Where your hand goes.


Picture 1: What you WILL make.
2: Make these. Make two more of each, just don't make them with white rods sticking out of them.
3: Get those. (If this is too hard maybe you shouldn't be building this XD)
4: Put those things on the other things.
5: Put the other ones on.
6: put these on each side. Note the broken Y clips. They are optional.

NEXT STEP!!!

Step 2: Plates

Picture of Plates
M1911.45 1 002.jpg
This is where the good looks are. 

1: Make this stuff..
2: and make all this. 


NEXT STEP!

Step 3: Break!!!!

I got a real picture this time!
And this time you can actually eat it! JK, Unless you have superhuman powers...
1-40 of 152Next »
knexboy58610 months ago
love this gun
AWESOME GUN
meh
Oblivitus1 year ago
I like how my name is in the tags, lol.
Hey, the part on the handle that sticks out, that kinda broke off a little bit, so to fix that problem, I put a white rod with a blue clip right over it, and they connect on the two yellow connectors at the back. Also, for the sight, I used a broken white rod with a y clip, which works better for me. :)
tarantulas12 years ago
would you please make a piece count?
this is my 10th time building this its that awesome
Seleziona (author)  altair ibn la ahad3 years ago
lmao, awesome!
but if it had a mag it would be awesome
Seleziona (author)  altair ibn la ahad3 years ago
I think it's good singleshot. but whatever
you think its good i got to make hole in a dart board
You can really make a mag on it!:O
Check out the pic I got of this gun =)
ECP_00001.jpg
How many mega pixels?
huh?
Lol Wat?
challenge-accepted-meme.jpg
Mega pixels?
Mega pixels are how high of a quality picture. I was being sarcastic.
Love this gun! 5*
rheath22 years ago
OOOOOOOOOOOOOOOOOO, GRAPEFRUIT!!!!!! Quick, who has the sugar?!
webby4272 years ago
<3 <3 <3
♥♥♥
Seleziona (author)  webby4272 years ago
! ! !
All these tags and only 2,241 views? D:
Seleziona (author)  Abcwtfidontcare3 years ago
I guess so D:
you had all the tags grouped together....
cazadactle2 years ago
Cheers I made this and modded it but even though its only single shot its awesome and i give it a well deserved 5 stars!
what do you mean broken white rod its yellow
Seleziona (author)  DontShoot2624 years ago
oh, no. That is a half of a green rod. Sorry!
what is the point in cutting a green rod in half
Seleziona (author)  KnEx FrEaK 13 years ago
When you put it on a connector it keeps the two tabs of a connector from collapsing inwards and wrecking the part.
gassybeans3 years ago
does the half moon REALLY need to be broken?
Seleziona (author)  gassybeans3 years ago
No, it doesn't. Where did I say it did?

you didnt its just it shows the half moon on the top in pic 2 is broken and btw check your inbox
Seleziona (author)  gassybeans3 years ago
okay.
jammy53 years ago
is it slide action??
Seleziona (author)  jammy53 years ago
Nope!
bacp033 years ago
this gun is so cool i built 2
Seleziona (author)  bacp033 years ago
Thank you very much!
your welcome
1-40 of 152Next »