Introduction: M4 Carbine, Knex
The M4 Carbine
This was posted on my Birthday (21st Jan) (even though it sais the 19th) :)
Updates:
1.0 - Base Gun with no updates and no accessories
About my gun:
Credits to The Dunkis' for the (most excellent) magazine.
Based off of the M4 Carbine in Call of Duty 4: Modern Warfare
This is not an M4A1 Variant...
Stats:
Model: M4 Carbine
Mechanism: Slide Action FPM
Range: 20-50 feet depending on Rubber Bands used… mine got 30 with one (loose/weak) #64
Magazine: The Dunkis’ (amazing) STANAG
Pros:
Great looks
Cons:
Stock is a little too large for my liking…
I don’t like the carrying handle…
Pieces Warning: This build may take up a lot of your pieces. It includes a large count of Y connector "Black Hands" - 25 in total. Also you'll need 8 half orange conns. Also, a black rod is recommended, but not required...
If you can, please take time building this.
I will look forward to seeing your comments.
And last but not least, please comment, rate, comment again, then subscribe :)
Step 1: ForeBarrel
just make..
Step 2: Grip/Tactical Rails
From now on i'll be just putting the pictures in and saying make...
just follow the pictures, its seriously not that hard...
Step 3: The Dunkis' Banana Magazine
Right click and open this in a new tab/window:
www.instructables.com/id/Remington-ACR-Adaptive-Combat-Rifle-Knex/step2/The-Dunkis-Magazine/
Step 4: Stock/SlideAction
...
Step 5: Handle/Trigger Assembly
Step 6: Barrel
Step 7: Body
Step 8: The Inner Trigger Band
Just follow the video through and you should be good.
Can't see the embed?
http://www.youtube.com/watch?v=Vxq29LxtO3s
Step 9: Assembly So Far
...
Step 10: Carrying Handle
Step 11: Final Assembly
...
Step 12: Attaching the Grip/Forebarrel...
heres both another forebarrel and how to attach it...
you'll need 4 green cons and 4 y connectors..
Can't see the video embedded?
http://www.youtube.com/watch?v=NKhL_RA6CAo
Step 13: Done
there ya go guys
please note that MotaBoi's M4 and mine started off as a collaboration and that is why they have the same grip idea...
This is my Desert Eagle .50 model... it probably wont be posted as a full ible...
Also sorry about the lousy instructions for the AK and M4, I got really bored making them and i thought that writing the words over and over again is pointless.. especially as you guys can easily guess what im gonna say..
