Remove these ads by
Flag this comment as:
Not NiceInappropriateSpam
3 Simple Ways to Share What You Make
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Create on the go:
With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I had an old mag lite from 1995 it was 5-D maglite... . I decided i need to wake him up from his sleep. and make a powerfull light for my bike. the t...
first you need to unscrew the reflector head from the shaft of the maglite Usually it is done by unscrewing the reflector after dissambling the refl...
after the reflector part is clean you have the reflector able to have in it 52 mm diameter so you can have inside pretty strong and big lamp the le...
here is the led system fits perfectly in the maglite
remember that the small circle is the ( +) the outer circle is ( -) the current runing from the batteries is quite strong so dont make shortcut ! A...
Hey, you can buy from the internet ( my case DX) but you can buy it anywhere, you need to lok for holder for two 18650 case than you need to replace t...
few things : firstly the maglite is quite thick metal thing that way you dont really need aheat sink. you can use a thermal paste between the maglit...
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
![Voltage Regulated [5v] Bicycle Dynamo Light & USB Charger](http://www.instructables.com/files/deriv/FKR/TCHO/GSEEJZIP/FKRTCHOGSEEJZIP.SQUARE.jpg)
Visit Our Store »
Go Pro Today »