Introduction: MAKE a "RC REMOTE" SAFE
today in this project you can learn to make a RC remote safe which can fool anyone to think that it's a rc remote but actually it is a hidden safe..
Step 1: MATERIALS
1 : one old or not working rc remote
2 : screw driver ( both plus and minus ones )
3 : a blade
4 : a hammer
5 : hot glue gun
Step 2: DISSEMBLE THE REMOTE
now when you are finished dissembling the remote take out it's chip and cut the following things apart.
the on and off button
the red led part
and the led's from the chip.
Step 3: MAKING THE SECRET COMPARTMENT
now take the minus screw driver and with a little help of the hammer poke many holes on the sidelines of the remote's battery area as shown above.after that use the hammer and smash the area between the area of the poked/screwed holes.(note:- it's not necessary to use the screw driver and the hammer u can also cut it by heating up a knife and then cut it,.)
but remember not to cut/smash the lock area of the remote .....
Step 4: COMPLETION OF THE RC REMOTE SAFE
now use the hot glue gun and and glue all the components of the remote ( the on and off button,led's etc ...)
now your " RC REMOTE SAFE " is ready . you can use it to hide money,chewing gum or pull pranks with it.
have fun building this item .. enjoy it to the fullest..