Print PDF
Favorite
Email
Step 3Programming the board
Now, we have to code the little task that will make the effect. I attached a '.c' file with the code and the instructions inside.
Notice that you'll need the Make Controller firmware source code, downloadable from http://www.makingthings.com/makecontrollerkit/software/index.htm. You may also want to have a C editor. For the MAKE Controller source code I really recommend you CrossStudio (http://www.rowley.co.uk/arm/) because it includes the source editor, a compiler, and the project manager. There's an alternative instead: using GNU ARM compiler together with cygwin. Read the make controller tutorials to get more information about these topics ;-)
Notice that you'll need the Make Controller firmware source code, downloadable from http://www.makingthings.com/makecontrollerkit/software/index.htm. You may also want to have a C editor. For the MAKE Controller source code I really recommend you CrossStudio (http://www.rowley.co.uk/arm/) because it includes the source editor, a compiler, and the project manager. There's an alternative instead: using GNU ARM compiler together with cygwin. Read the make controller tutorials to get more information about these topics ;-)
code_ledeffect.c1 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
