Introduction: MAKE LEDS FLASH TO MUSIC

Picture of MAKE LEDS FLASH TO MUSIC

This is an easy way to flash LEDs to music!

Step 1: YOU WILL NEED

Picture of YOU WILL NEED

Amplifire

3 LEDs

Speaker wire

Step 2: Steps

Picture of Steps

First connect the LEDs in a parallel circuit.

Second connect you speaker wire to the LEDs, and the positive wire of the led to the red speaker connector on your amplifire same with the negative!

Lastly test it if it works you have done it correctly if not try turning the volume up high (NOT TO HIGH THOUGH OTHERWISE THE LEDS WILL EXPLODE!)

Comments

DIY Hacks and How Tos (author)2016-01-13

Hi and welcome!

We're glad you want to share something with the community, and this project looks very interesting. However, in order to be published this project must only contain original images created by you. Please replace any stock or otherwise borrowed images with your own.

Once you do that, leave me a message and we will publish your work!


Thanks,

Your friendly neighborhood instructables staff.

DIY Hacks and How Tos (author)2016-01-11

Hi and welcome!

We're glad you want to share something with the community, and this project looks very interesting. However, in order to be published this project must only contain original images created by you. Please replace any stock or otherwise borrowed images with your own.

Once you do that, leave me a message and we will publish your work!


Thanks,

Your friendly neighborhood instructables staff.

About This Instructable

49views

0favorites

License:

Bio: Go to jackshow2s.weebly.com for more! Also Check Out Me On YouTube!
More by Jacks how2s:How to Make An Automatic Coffee Pod Dispenser With ArduinoHow to Make a 555 Timer Blink Circuit on a PCB!DIY 3D Printed Fidget Spinner
Add instructable to: