Introduction: MAKE a PRESSURE PLATE DOORBELL

Picture of MAKE a PRESSURE PLATE DOORBELL

Have fun

Step 1: Make the Plate

Picture of Make the Plate

First get 2 pieces of cardboard and cover 1 side in foil.

Second now get another piece of cardboard and cut out the middle and glue it onto one of the foil sides of the cardboard.

Lastly get some wire and tape a wire to each foil square now tape both sides together.

Step 2:

Picture of

Now find the connections of the doorbell button and solder the wires from the pressure plate to the doorbell!

Comments

Jacks how2s (author)2016-01-13

For more of my projects go to
Jackshow2s.weebly.com

Jacks how2s (author)2016-01-13

Yes, I have set it up so whenever someone stands on the doormat they activate the doorbell!

tomatoskins (author)2016-01-12

Really cool idea! Any plans of setting up outside your home?

About This Instructable

793views

13favorites

License:

Bio: Go to jackshow2s.weebly.com for more! Also Check Out Me On YouTube!
More by Jacks how2s:How to Make An Automatic Coffee Pod Dispenser With ArduinoHow to Make a 555 Timer Blink Circuit on a PCB!DIY 3D Printed Fidget Spinner
Add instructable to: